The reasons I wrote about this DSLR shoulder rig are not only the superior high quality but in addition the affordable cost for less than $200. So there is no wonder that the Opteka CXS-2 Dual-Grip Video Shoulder rigs process is high ratio of performance and price.
Then have a look at the Item:
Constructed of an extremely high quality aluminum and stainless steel material, the shoulder support system is designed to accommodate little digital SLR cameras, all the way up to prosumer camcorders. Virtually all adjustments are produced making use of thumbscrews, and may be additional tightened using a wrench for added self-confidence. The camera, and shoulder pad can all be adjusted to fit the body (right or left shoulder) and shooting style. Fundamentally just about every element from the Opteka Video Shoulder Support Technique is adjustable to align and balance your rig. The CXS-2 Opteka Video Shoulder Support Process will allow any filmmaker to attain qualified final results.
Some exclusive styles: Dual-handle style reduces rotation, Heavy-duty aluminum construction, Lowers fatigue although reducing vibration and shaking, Customizable with the CBW-1 counterbalance weight and CXSB-1 strap (sold separately) and Contains 15mm rails for mounting accessories. Compatible Accessories (Might call for mount): LCD Monitor, Video Light, Microphone, FollowFocus, CBW-1 Counterbalance weight, CXSB-1 Strap method
Dimensions (LxHxD): 21 x 14 x 7" (53 x 35.5 x 17.8 cm)
Weight: 4.8 lbs (2.17kg)
Probably the most useful reviews in regards to the shoulder rig:
I do suggest investing in a viewfinder. You can uncover one particular on the web for about below $100 dollars. The components they use are very great aluminum or metal. It doesn't feel low-priced. The shoulder pad is extremely comfortable for extended video shooting. I honestly dont have anything negative to say about the item. I guess so far so very good.
The EX-1 was fine because the screw acted because the guide pin. Other thing was the extension arms that flare out to the side for a monitor, etc. It's only hand tightened using a round knob and it never really gets totally tight. I had to hand tighten it at an angle that I didn't want, then pull it absolutely tight to where I did want it. Not a huge factor, but if someone was utilizing it that didn't know that, it would very easily come loose and who knows what could possibly come about.
Tried it out with a 5D with a 70-300 zoom I had, and also place an EX-1 on it too. Had to raise the mount each of the way up the shoulder pad because the EX-1's rear was hitting it, but that was fine. Could nevertheless see the viewfinder properly and it wasn't uncomfortable. I also had the weight on it which truly genuinely helps. To get a cheap price tag it was a major plus, so I recommend finding a single of these. I am a bigger guy so when I had it all assembled, it literally sat on my shoulder with superior balance, though for smaller men and women, I'd put a thick towel or one thing over your shoulder and then the rig, only to wrap tighter about your shoulder and back location, even though you may not want that. Only other big challenges I had was the guide screw instead of a pin on top rated from the platform, but I guess it really is nice that it really is a screw because you could take it out. With it in, the DSLR bodies rested on it and kinda kinked it upwards a hair.
No comments:
Post a Comment